Tesla EV Charger Install - Ryde


Type of install - Side by side from Switchboard to charger location

Power - Single phase install on a 32a A Type safety switch with a Surge Protector

Charger install location - Ryde, Sydney. 


Installing the Tesla Gen 3 WallCONNECTOR

The charger install was great, it was a brick veneer wall, this meant there was just enough room for us to thread the cabling through the back of the wall, dodging the timber and brick, via the cavity to the switchboard, giving a really neat outcome for his Tesla charger install.

It's rare we install black Tesla chargers but Rohit opted for the dark look and external cable holster. It was very simple, this came as a stock white charger, then we replaced the cover plate with a few screws. 



https://www.westcork.com.au/projects/ev-charger-install/tesla-ev-charger-install-ryde/


Tesla charger install


Do you need an EV charger Install too?

Contact us and we can help you out.

We are Inner West Electricians

Contact us for your EV charger install or other electrical items below...